Home
Contact
Careers
Galleries
Domestic Gates
Swing Gates
Sliding Gates
Commercial Gates
Commercial Systems
Swing Gates
Metal Gates
Wrought Iron and Steel Gate Designs
Steel Framed Wooden Gates
Wooden Gates
Wooden Gates
Field Gates
Steel Framed Wooden Gates
Brickwork
Barriers
Automatic Barriers
Traffic Flow Systems
DIY Kits
Gate Designs
Garage Doors
Special Projects
DDA Compliance
Architectural Guidelines / Specifications
Maintenance
Support & Repairs
Safety Features
Manual Release Pages
Callout Request Form

Field Gates

The following are examples of field gates by AAC.

For more information on field gates click here >

   
Universal Fence Gate

Universal and Hunting Gate
Double cross-bracing gives the Universal gate it's distinctive diamond shape at the centre and makes it exceptionally strong. This traditional design incorporates mortise and tenon joints , 'water' joints at each end of the top rail and bolts at all crossings. Available in treated softwood, Keruing and Iroko, the components are all planed, with stop chamfered top rail and sides. The Hunting gate is the smaller counterpart of the Universal.

Sizes: 0.9, 1.2, 1.5, 1.8, 2.1,.2.4, 2.7, 3.0, 3.3 and 3.6m.

   
Kent Gate

The Kent Gate
Simple but rigidly structured, the Kent gate has it's own characteristic charm and is suited to use as either an entrance gate (shown here painted white) or as a field gate. The construction incorporates the standard design features, planed components throughout and with stop chamfers as the Universal. Available in treated softwood, Keruing and Iroko

Sizes: 0.9, 1.2, 1.5, 1.8, 2.1,.2.4, 2.7, 3.0, 3.3 and 3.6m.  

   
Sussex Gate

The Sussex Gate
This is a variation the Kent pattern with one extra rail and hence closer spacing of the lower rails, ideal if you have small animals to contain. The construction incorporates the same standard features as the Universal and is available in a choice of treated softwood, Keruing and Iroko.

Sizes: 0.9, 1.2, 1.5, 1.8, 2.1,.2.4, 2.7, 3.0, 3.3 and 3.6m.

   
Wealden Gate

The Wealden Gate
The Wealden gate stands out from the crowd with its distinctive vertical palisades. Available in sizes up to 2.4 m only, this is ideal for the smaller entrance or equally charming as a pair. Available in treated softwood, Keruing and Iroko.

Sizes: 0.9, 1.2, 1.5 ,1.8, and 2.4m

   
Yeoman Gate

The Yeoman Gate
This popular design, with it's extended curved hanging stile and long diagonal brace, makes an attractive entrance as a single gate or can be paired with the small Yeoman. The construction incorporates the same standard features as the Universal and is available in a choice of treated softwood, Keruing and Iroko.

Sizes: 0.9m 1.2, 1.5 and 1.8,.2.4, 2.7, 3.0, 3.3, 3.6m.

   
 
 

[top]

© Automated Access Contracts Limited 2005 Automatic Gates, Barrier Systems
London, East and West Sussex, Surrey, Kent and Berkshire